47 Hammond Street
Hamilton   Victoria   3300
 (03) 5571 2115 bob@precisionmarine.net.au

FENDERS for boats

Click Image to Enlarge

Product Description

Top quality heavy duty inflatable fenders, made in Holland.
Manufactured from UV resistant white PVC with BLUE reinforced star pattern heads in the classic
European style.
These fenders are commercial quality at a very realistic price.
A large range of sizes are available to suit small runabouts up to large yachts and cruisers.
Available as fender only - Inflate fenders with an air compressor or use a special majoni bike pump adaptor fitting.

Size:

Fender - White/Blue 120x450mm
SKU: RWB1540

Fender - White/Blue 150x580mm
SKU: RWB1541

Fender - White/Blue 180x600mm
SKU: RWB1542

Fender - White/Blue 210x620mm
SKU: RWB1543

Fender - White/Blue 240x700mm
SKU: RWB1544

Fender - White/Blue 300x900mm
SKU: RWB1545

Fender - White/Blue 350x1100mm
SKU: RWB1546

Fender - White/Blue 450x1400mm
SKU: RWB1547

Fender - White/Blue 600x1600mm
SKU: RWB1548

Details:

How to use fenders and buoys

Fenders are designed for protection against damage to your boat and are placed in areas where the boat will make contact with another boat or dock.

The size of the fender required will depend on the size of the boat. On average, six fenders are needed for good protection with three along each side, however you may need more for larger vessels or less for boats that are smaller in size.

Our fenders and buoys require minimal maintenance, you can simply wipe or rinse them down with clean water. If they are grimy and need a proper clean, just add non-abrasive soap to fresh water and lightly scrub them with a damp cloth.

With proper use and care, fenders can protect your boat for more than forty years.

Easy inflation and deflation

We use an unique strong brass valve for easy inflation and deflation of our fenders and buoys. The best way to inflate a fender is pushing air pressure from a compressor with a flat head against the valve and the fender will inflate.

It is also possible to inflate the fender with a bicycle and/or car pump, but only with the use of a special adaptor (see related products). Please do not use a handset with a pin to inflate, because this pin can damage the valve.

The best inflation pressure is 0.2 bar. This is the pressure where it is possible to press the body of the fender easily with your flat hand.

For deflating just push a pen slightly in the valve to let the air out. Due to extreme whether conditions the air pressure in the fender can change, so we advise to check the pressure and shape of your fenders frequently.

Spare valve

You can replace the valve with turning in a bolt M3 (or a woodscrew) and pull it out with a pair of tongs. After inspecting the valve, you can push a new valve back in the tube with your hand or a pen.